| MarkaSteel-MG Magnetic Dry-Erase - unprinted & printed all 30" x 40" | ||||||||||||||||||||||||||||||||||||||||||||||||||
|
Indoff - offices nationwide |
30" x 40" custom dry erase board Ordering questions & details Printed & Framed |
|||||||||||||||||||||||||||||||||||||||||||||||||
| There is No Marker Tray on these boards unless noted if needed see Trays | ||||||||||||||||||||||||||||||||||||||||||||||||||
|
Pricing is all Retail --- Call for resale and volume discount ! NOTE => 30" x 40" Lead Time may be an extra 4-6 weeks 30" x 40" blanks not always in stock If 30" x 40" steel is not in stock use 36" x 48" price + shearing charge Mounting is different for all boards - please take into account DaPlus film overlay on unfilmed boards is $26 for 30" x 40" DaPlus film adds a chemical protection for hospital use
|
||||||||||||||||||||||||||||||||||||||||||||||||||
| Minimum | 1-19 | 20-249 | 250 plus | |||||||||||||||||||||||||||||||||||||||||||||||
|
(1) 1/2" Plastic Frame Board with and without DaPlus #2 Aluminum is recommended over this 30"x40" |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
1/2" Plastic Frame Printed Steel with adder shown for DaPlus |
updated 8/15/2012 |
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||
| 3/16 or 3/8 thick plastic frames are to thin for this board - must be 1/2" inside dimension for these face is 9/32" | ||||||||||||||||||||||||||||||||||||||||||||||||||
|
(2) Ohio Aluminum Frame Best bet for this size board!-
Tray Optional with and without DaPlus a fantastic board with D-Rings
30"x40" |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
Ohio Alum
Frame Printed Steel with adder shown for DaPlus W/O tray |
updated 8/15/2012 |
|
|
|
Plastic
Tray is adder Angle Brkt Extra at $.50 each |
|||||||||||||||||||||||||||||||||||||||||||||
|
(15) EZ-Hang 1" deep aluminum frame with 137hidden mounting brackets - Trays not in price 30x40 |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
EZ-Hang with adder shown for DaPlus |
updated 8/15/2012 image |
|
|
|
Add $45 Aluminum tray |
|||||||||||||||||||||||||||||||||||||||||||||
|
(3) Printed steel skin only no framing --- Radiused corners available for $16/unit both with and without DaPlus 30x40 |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
Printed Steel Skin Only Square Cut with adder shown for DaPlus |
updated 7/14/2011 |
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||
|
All prices above correct 7-14-2011 (6) Low cost 3/32" Plastic Frame is cheaper but is very thin and needs full mounting should use aluminum on this |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
(7) Steel Skins (unprinted) for those that need plain magnetic receptive dry erase (call for dealer pricing on this item) |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
seeSee Skin Repacks special
price |
see repacks |
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||
|
(8) Wood Framed printed steel 8-12 week lead time - NO film in this price |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
(11) For Big boards on West coast NO film in Price |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
(12) CT alum frame with aluminum Tray built in-deduct $6 for no tray |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
(13) Boards that are not Steel and are not magnetic receptive below - DaPlus film can not be added to these |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
(16) 1/2" thick alum frame- skin on 1/2 MDF no tray EZ-Hang aluminum add $5.00 per board |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
seeA2810 | |||||||||||||||||||||||||||||||||||||||||||||||
| custom sizes available by cutting down standard sizes see costs => here charges are in addition to above prices | ||||||||||||||||||||||||||||||||||||||||||||||||||
Corners Radiused at 2" available on Printed skins at $16 per board 30" x 40" this page Skin is just the .024" thick steel with a dry erase surface on one side - it needs to be framed or attached to a back to be used. |
||||||||||||||||||||||||||||||||||||||||||||||||||
|
Please contact me for further information, samples and pricing. Partial update all of top-8-15-2012 |
||||||||||||||||||||||||||||||||||||||||||||||||||