Cut Tolerance

 * Back To *

***We recommend you get a piece of  heavy stiff poster paper or thin cardboard and cut to size you are ordering and try it on boards to maximize chance of a good fit.

These cut tolerances apply to
DaPlus10, to magnet overlays, to 3M overlays,
to Inserts for COAF boards

 

Here are sizes we can cut to-- Remember when cut it is + or minus .063" or 1/16"
1/32"=.0312"=0.795mm		1 mm = .03937"	1 ft = 304.8mm=.3048m
1/16" = .063"=1.65mm	5/16" = .313"=8.00mm	9/16" = .563"=14.30mm	13/16" = .813"=20.60
1/8" = .125"=3.17mm	3/8" = .375"=9.50mm	5/8" = .625"=15.88mm	14/16" =7/8" = .875"=22.22
3/16" = .188"==4.77mm	7/16" = .438"-11.12mm	11/16" = .688"-14.50mm	15/16" = .938"=23.82
1/4"= .250"=6.35mm	1/2" = .500"=12.70mm	3/4"= .750"=19.00mm	16/16"=1.0"=1.000"=25.40

Call Al at ext. 111 to discuss if this does not clearly answer your questions!

About Our Boards and US!
Indoff CT is a master at producing quality custom printed dry erase boards.