Master Index of all Visual Communication Products
ahutton@ahutton.com
(860)632-2026

DryApWall a MarkaWall Item

DryApWall and Plus Cleaning and Warranty


H

Home MarkaSteel-MG w/o Film

 

Care & Maintenance Instructions for the DryApWall Both clear and white
this cover DaPlus, DAW50 and DaPSA50

Important care before using writing surface:
A. Clean the surface completely with a non-abrasive household cleaner, such as a soap and water, glass cleaner, isopropyl alcohol, or Expo Cleaner. Dry with a clean soft cloth.    Important maintenance for  surfaces:
1. Use a dry erase marker from a reputable company.
2. Remove dry-erase markings with a felt eraser. Press firmly when erasing, using a circular motion. Replace erasers as they become dirty. A dirty eraser will leave ink residue on the writing surface.
3. For daily cleaning, or as needed, rinse the surface with soapy water, glass cleaner, or acetone. This can be done with a sponge or a soft cloth. Acetone will even remove ink from permanent markers.
4. If washing the material with a sponge or a soft cloth and water will not remove the marks, use spray cleaner or wipes recommended by the marker manufacturer or acetone.
CAUTION:
Do not use ballpoint pens or other sharp pointed instruments on the surface.
Do not use abrasive cleaners on the surface.
Permanent marker may be removed with dry erase marker manufacturer spray cleaners or wipes or by writing over the markings with a dry erase marker.
Note:
Failure to follow these cleaning instructions could cause you to void the manufacturer's warranty.

DaPlus, DAW50 and DaPSA50     Limited Warranty for non hospital use
Our Factory has been in the laminates and composites business for so long that, unlike the competition our private label manufacturers product is warranted for 6 years not to check, crack, chip, peel, or delaminate when used in interior applications. Because of the high quality products that go into making our dry erase composite, Our OEM also guarantees that the DryApWall product will not fade or yellow during this time. Our OEM also offers a limited 6 year warranty on its marker ink receptivity and erase ability, if used as recommended.
If, in the sole opinion of Our OEM a product covered by this warranty is defective or fails to perform as warranted, Our OEM will replace the product free of charge up to a period of 6 years from the date of shipment from Our OEM. This warranty is in lieu of all other warranties expressed or implied and is the sole warranty extended by Our OEM. The liability of our OEM.under this material warranty is limited to the replacement of DryApWall products and does not include any responsibility for removal, reinstallation, or other damages. This warranty is only valid when installed, used, and maintained in accordance with our written instructions and recommendations.
 

For Hospitals --- see Hospital Warrenty  also see RESURFACE