|Indoff - offices nationwide
Ceramic Steel, Porcelain steel and Porcelain Enamel Steel are
the generic terms for
Claridges LCS and Polyvisions P3 top quality magnetic dry erase materials.
see Skins for explanation of how used
|Types of Porcelain-over-steel Surfaces Available- all with 1/2" backing|
|Manufacturer||Cost||Width in one solid backed piece||Width w/ Concealed Splines||Lead time|
|48" max||not available||6-8 Weeks|
60" max to 12' long
any combo of boards to left
ship as separate pieces
Pł 6100H, 28ga thickness information:
Steel Enamel-Bottom Enamel-Top TOTAL
0.013" (± .001") 0.002 - 0.003" 0.004 - 0.0055" Min. 0.018"
The steel nominal is 0.013"
The bottom enamel nominal is 0.0025"
The top enamel nominal is 0.005
Total nominal thickness is 0.020"
to adhere steel skins to chalkboards use WilsonArt LW600 do not use Claridge 16A
See Porcelain-over-steel-skins if doing steel to chalkboards
|Seams are normally run vertically! Alliance can supply skin only in 200 ft lengths either 4' or 5'|
|Alliance is FOB CA or IL
Alliance is Stocked in:
Markerboard Standard White
Markerboard Brilliant White
Porcelain Plus White-projection use
Claridge is FOB Arkansas only on cut sheets
Polyvision skins are FOB New Hampshire
|Our Ceramic steel alternative - What a value see MarkaSteel -MG|
|Full Whiteboard Index|