Cutting Charges on MarkaSteel MG

  indoff.jpg (10361 bytes)

Indoff    - offices nationwide
all items drop shipped from MFG
860-632-2026
860-632-2028 Fax
ahutton@ahutton.com

Make Standard size blanks smaller

if getting thousands of pieces this charge will not apply and we will cut to size instead of trimming blanks

Tolerence on cuts is +/- 1/16" and cuts must be at least 1/4"  i.e. we cannot cut 1/8" off a stock blank
Pricing is all Retail   5/08   are per board
These cost only apply to Printed MarkaSteel skins or with plastic or aluminum frames

note Tolerance on cuts is +-1/16" and cut must be at least 1/4".

Corners Radiuses at 2" available on Printed skins at $8 per board
 
Size One Side Cut
Skin only		 Two sides Cut
Skin only		 One or two sides
cut adds $ to framing		 Total One Side Total 2 Sides  
  Shearing only
 no framing		 Shearing only
no framing		 Framing Adder per board
if cut		 Shearing +
Framing		 Shearing +
Framing		  
9x12          

 

  
12x18 $4.00 $8.00 $10.00 < 10
$5.00 >10 		$14.00 < 10
$9.00 >10 		$18.00 < 10
$13.00 >10 		 
18x24 $4.00 $8.00 $10.00 < 10
$5.00 >10 		$14.00 < 10
$9.00 >10 		$18.00 < 10
$13.00 >10 		 
24x36 $4.00 $8.00 $10.00 < 10
$5.00 >10 		$14.00 < 10
$9.00 >10 		$18.00 < 10
$13.00 >10 		 
 

36x48

 

 $6.00 $12.00 $10.00 < 10
$5.00 >10 		$16.00 < 10
$11.00 >10 		$22.00 < 10
$17.00 >10		  

48x72

 $6.00 $12.00 $10.00 < 10
$5.00 >10 		$16.00 < 10
$11.00 >10		 $22.00 < 10
$17.00 >10		  

48x96

 $6.00 $12.00 $10.00 < 10
$5.00 >10 		$16.00 < 10
$11.00 >10		 $22.00 < 10
$17.00 >10		  
to get 4x4 from 4x8
you will pay for 1/2 of a 4x8 plus  		           
             
             
 
Also we can cut 2" radiused corners see printed steel
9" x 12"  12" x 18"   18" x24"      24" x 24"   24" x 36"    Cork Comb-24x36   36" x 36"   36" x 48"   48x48"     48"x72"
 

Please contact me for further information, samples and pricing.  2/01/07 all ok      for 18x24