indoff.jpg (10361 bytes)
 

P3 Material  - ceramic write-on surface
 being applied to steel sheet

Indoff    - offices nationwide
7 Twin Oaks Dr
Cromwell, CT 06416
860-632-2026
860-632-2028 Fax
ahutton@ahutton.com

Help deciding how large porcelain over steel board you can get!

The Question is really 3 parts i.e. do you want the skin only,  a plywood backed skin or a framed board
Skin Only
Polyvision P3 skins are made 4' wide and pre-P3 skins are made 5' wide.    you can order the skin only in any length you want - yes you can get a 100 ft single long piece.      You can order multiple pieces and mount them next to each other but their will be seams.
Plywood Backed Skins
P3 is available in one piece at a maximum size of 4' by 16'
Pre-P3 is available in one piece at a maximum size of 5' by 12'
You can order multiple pieces and mount them next to each other but their will be seams, we can spline the board for a better fit.
This way you can do a 12 ft high by 50 ft wide wall or anything smaller.
Framed Boards Shipped as one piece units
P3 boards (only available in 4 ft) can be a maximum of 16 ft long made without any seams
Pre-P3 boards (only available in 5 ft width) can be a maximum of  12 ft long without any seams
Framed Boards Shipped in parts that require field assembly
P3 boards (only available in 4 ft) over 16 ft long will be shipped in 2(or more) sections with a splined joint - total length unlimited
Pre-P3 boards (only available in 5 ft width) over 12 ft long will be shipped in 2(or more) sections with a splined joint - total length unlimited
Back to Main Polyvision/Alliance Page