Master Index of all Visual Communication Products

Retrofitting Existing Boards

 * Back To *

Methods we offer to totally redo and renew existing  framed boards wither printed or non printed to make them custom printed dry erase.   All these options offer superior dry erase with magnetic receptiviity.

1.  Filmed Steel Skin cut to size to overlay old dry erase surface.   Will work on uneven surfaces that are either steel or non magnetic.   Steel skin needs to be permanently glued to old surface.

2.  Magnamedia + single sided PSA coated Invisilock™    This Invisilock can be used on steel or non-steel surfaces and the Invisilock™    is pretty much on forever even thought the Magnamedia  is interchangeable


3.  Magnamedia + double sided Invisilock™   This double sided Invisilock can can only be used on steel surfaces.   However it is REMOVABLE so board can be returned to original state or can be a quality magnetic receptive dry erase and interchangeable Magnamedia system.

Note 1,2 and 3 Above allow you to keep existing frame and not have to remove it! 4&5 require you to remove old frame and then install new frame.

Video-Retrofit - showing existing EZ-Hang retrofited with Double sided Invisilock+Magnamedia
System Available Today - Rough pricing below at #3

All Videos show each =>   Retrofit   Invisilock Framed  Full Wall

For 18x24 Retrofit see 18x24-retro

your cost per board based on 50 piece order excluding labor for retrofitting  24"x36" made into as new custom printed dry erase by the 3 methods above
approximate insert size 21-3/16" by 33-3/16"
Method per sq ft   Price each Advantages Disadvantages
1. Filmed Skin $10.67   $64 DaPlus proven Fixed Image
2. Single sided Invisilock + MagnaMedia $10.30   $62 Interchangeable  
2a  Single sided Invisilock only no Magnmedia $2.30        
3.  Double sided Invisilock + MagnaMedia $12.70   $76 Interchangeable only for steel board
3a Double sided Invisilock only no Magnamedia $4.70        
4.  New Plastic framed complete




5.  New EZ-Hang or Wood




6  New Invisilock base w/Ohio no image $11.17   $67    
7. Magnamedia only-Cover for Invisilock $8   $48 Printed+magR+DryE  
8.  6&7 combined - a complete unit $19   $114    
9.  Non Printed Dry Erase Mag Receptive $5.50   $16.50 IVM-48-MDE  
10. Projectable Mag Receptive  Not dry Erase $4.00? about   available  


                  Method 1 above shown below                                    

This Project was done by Rogue Valley in Medford Oregon

They had existing wood framed boards that originally were just white.   They then put on vinyl letters as shown in before picture.   The letters kept coming off so they wanted a permanent solution.

We sold them steel pre-printed skins cut to 14" x 46" which they then glued over existing board.   Note they did not want color even thoght color and images are the same price.   This saved their existing units at a very reasonable price of $72  per skin.  High price based on odd size

 Index Below!





About Our Boards and US!
Indoff CT is a master at producing quality custom printed dry erase boards. 

Remember Pricing on web is List and does not include resale and volume discounts   2/01/07